Ультразвуковой дефектоскоп
WhatsApp
WeChat
Ультразвуковой дефектоскоп SD-UFD681
Модель: SD-UFD681
0–15,000 mm · 5.7″ IPS display · 500 channels · auto-calibration · PDF reports
- Диапазон 0–15,000 mm (steel); transmission to 30 m
- Дисплей 5.7″ IPS, 640×480, 60 Hz
- Каналы / отчёты 500 / 1000
- Динамический диапазон ≥100 dB
- Отчёт PDF
Мин. заказ 1 шт. · Срок 5 рабочих дней · Ответ в течение 8 часов · Возможен OEM / ODM · Гарантия 2 года
Технические характеристики приведены на английском языке для точности числовых значений. Для получения предложения или технического подтверждения на русском языке свяжитесь с нами напрямую.
The SD-UFD681 is a digital portable ultrasonic flaw detector designed for fast, damage-free detection, location and evaluation of internal defects (cracks, inclusions, pores) in welds and materials. The 5.7-inch IPS display offers a wide viewing angle with a 60 Hz refresh rate, and the ergonomic housing is water- and oil-resistant.
Auto-calibration covers probe zero offset, probe angle (K value) and material velocity. Up to 500 test channels and 1000 defect reports can be stored, and inspection results are exported as PDF reports.
Features
- Ergonomic, waterproof and oil-proof housing with rotating damping bracket and rubber sheath
- 5.7-inch IPS high-brightness display, no viewing angle, 640×480, 60 Hz refresh
- Auto-calibration of probe zero offset, probe angle (K value) and material velocity
- Real-time screenshots and PDF flaw-detection reports to USB drive
- Peak-hold and edge trigger modes; echo gate and loss-of-echo gate
- 500 test channels and 1000 defect reports storage
- Straight, angle, dual-crystal and through-transmission probe support
Technical Data
| Item | Technical Parameters | |
|---|---|---|
| Measuring Range | 0–15000mm (at steel velocity); transmission up to 30 m | |
| Material Velocity | 100~20000m/s | |
| Operational Stability | Signal amplitude variation ≤±2%; signal time-base offset ≤±0.5% | |
| Probe Frequency and Amplifier Bandwidth | Narrowband | Wideband |
| 1.0M(0.41-2.1)2.5M(1.4-3.6)5.0M(3.7-6.3)10M(8.2-11.8)15M(13-17) | 1.0M(0.43-2.3)2.5M(1.0-4.0)5.0M(3.0-7.0)10M(7.5-12.5)15M(12.5-17.5) | |
| Blind Zone After Transmit Pulse | ≤9μs | |
| Available Dynamic Range | ≥100dB | |
| Attenuator Error | ≤±1.0dB(20dB span)≤±2.0dB(60dB span) | |
| Vertical Amplitude Linear Error | ≤2% | |
| Horizontal Time-BaseLinear Error | ≤0.5% | |
| Repetition requencyand Accuracy | ≤±5%（20~2000Hz） | |
| Equivalent Input Noise | ≤30 nV√Hz | |
| Number of Testing Channels | 500 | |
| Number of Defect Reports | 1000 | |
| Testing Report Type | PDF testing reports | |
| Display Screen and Resolution | 5.7-inch IPS high-brightness wide-viewing-angle display; 60 Hz refresh rate; 640×480 | |
| Digital Rejection | 0–90% (does not affect linearity and gain) | |
| Probe Types | Straight probe, angle probe, dual-crystal probe, through-transmission probe | |
| Gates | Echo gate, loss-of-echo gate; single-gate reading, dual-gate reading | |
| Trigger Mode | Peak trigger, edge trigger | |
| Alarm Functions | Echo alarm, loss-of-echo alarm, buzzer alarm, LED alarm | |
| Power Supply | DC 9V; lithium battery (continuous operation ≥12 hours)Charger: AC Mains 100-240 VAC, 50-60 Hz | |
| Auxiliary Functions | Screenshot, recording and playback, B-scan, automatic DAC/AVG curve generation,AWS intelligent acceptance rating, data analysis software | |
| Advanced Functions | Weld diagram; probe frequency detection | |
| Video Recording Capacity | Internal storage: 10 video files(up to 5 minutes each, 30 frames per second real-time waveform);External USB: unlimited files/duration | |
| Dimensions | 230×157×52 mm | |
| Weight | 1.13 kg | |
| Operating Temperature | -30–55°C | |
| Relative Humidity | 20–95% RH | |
| Protection Level | IP62 | |
| Testing Standards | Compliant with EN12668-1 and other industry standards | |
| Pulse Type | Negative pulse wave; transmit pulse voltage: -100V–-500V (selectable in grades) | |
| Pulse Width | 30nS ~ 510nS(continuously adjustable to match different probe frequencies) | |
| Pulse Shift | -7.5 μs–3000 μs | |
| Pulse RepetitionFrequency ranges | 20 Hz to 2000 Hz | |
| Probe Damping | 50Ω, 150Ω, 300Ω, 400Ω (optional, to meet sensitivity and resolution requirements) | |
| Probe Zero Value | 0 μs–999.9 μs | |
| Sampling Rate | 12-bit AD sampling, 200 Msps, high-fidelity waveform | |
| Detection Modes | Positive half-wave; negative half-wave; full wave; RF wave | |
| Maximum Gain | 110 dB (step: 0.1dB, 1dB, 2dB, 6dB) | |
| Communication Interfaces | USB/RS232 | |
| Probe Interfaces | BNC/LEMO | |
| System Linearity | Vertical: 1.5% FSH, Amplifier Accuracy +/-1 dB. Horizontal: +/-0.1% FSW | |
| Sensitivity Leavings | more 50dB(Deep 200mmФ2 flat-bottomed hole) | |
| Dynamic range | more 36dB | |
| Pulse Displacement | more 32dB | |
| Resolving Power | more 42dB | |
| Noise | less than15% | |
| Display Delay | -20 to 3400 µs | |
| Probe Delay/Zero Offset | 0 to 99.99µs | |
| Test Modes | Pulse echo, dual element and thru-transmission | |
| Gate Monitors | Two independent gates controllable over entire sweep range | |
| Rectification | Positive half wave, negative half wave, full wave, RF | |
| Reject (suppression) | 0 to 80% full screen height | |
| Units | Inch or millimeter | |
| Note All indicators measured under: probe frequency 2.5 MHz, detection mode full wave. | ||
Ещё из этой серии
