Duromètre à ultrasons SD-UHT271
Modèle: SD-UHT271
HV/HB/HRB/HRC/HRA · 2 kgf probe · 3.5″ IPS · 600 records
- Échelles HV, HB, HRB, HRC, HRA
- Palpeur 2 kgf (5 / 10 kgf optional)
- Écran 3.5″ IPS, 480×320
- Enregistrements 600
- Batterie ~10 h
Commande min. 1 pièce · Délai 5 jours ouvrés · Réponse sous 8 heures · OEM / ODM disponible · Garantie 2 ans
Les spécifications techniques sont fournies en anglais afin de garantir l’exactitude des valeurs numériques. Pour un devis ou une confirmation technique en français, contactez-nous directement.
The SD-UHT271 uses the ultrasonic contact-impedance (UCI) principle to measure hardness without an optical indentation, covering most ferrous and non-ferrous metals. A 2 kgf probe (5 kgf / 10 kgf optional) reaches flange edges, gear-tooth roots, thin plates and surface layers.
A 3.5-inch IPS colour display, automatic probe recognition with hot-swap, and 600 records with USB output make it suitable for both workshop and laboratory use.
Features
- Ultrasonic contact-impedance (UCI) principle; no optical indentation needed
- Vickers, Brinell, Rockwell (HRB/HRC/HRA) scales
- 2 kgf probe (5 kgf / 10 kgf optional); automatic + manual probe recognition, hot-swap
- 3.5-inch IPS colour LCD, 480×320, adjustable backlight
- 3 additional material settings for special materials; multi-point calibration
- High/low limit alarm; 600 records with date, probe type and material
- USB 2.0 interface; ~10 h working time on 3.7 V lithium battery
Technical Data
| Measurement direction | perpendicular to testing surface |
|---|---|
| Hardness scale | Vickers (HV), Brinell (HB), Rockwell (HRB), Rockwell (HRC), Rockwell (HRA), |
| Display Measurement | Vickers (HV) + selected hardness scale |
| Measuring materials | steel and cast steel, cast aluminum alloy, pure copper. |
| Display | 3.5-inch IPS full digital color LCD display, resolution 480×320. |
| Probe recognition | automatic recognition + manual setting, supports hot swapping |
| Data storage | maximum 600 measurement |
| Working voltage | 3.7V lithium-ion battery pack |
| Continuous working time | about 10 hours |
| Charging power supply | 5V/1000mA; |
| Communication interface | USB2.0 |
| Probe test force | 2kgf(optional , 5kgf, 10kgf) |
